Home>Products>Timken Bearing>TIMKEN E-PF-TRB-3 Flange Block Bearings
TIMKEN E-PF-TRB-3 MODELS
Need a CAD or 3D Model?
TIMKEN E-PF-TRB-3 Flange Block Bearings
category
Timken Bearing
TIMKEN E-PF-TRB-3 SPECIFICATIONS
With over 10170 full-service stores, our TIMKEN E-PF-TRB-3 Flange Block Bearings inventory is extensive With cast iron cover Accessory and our parts are priced BEARING SUDAMERICANA,S.A. right. Insert Bearing Unit Unit, Type within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
- TIMKEN
E-PF-TRB-3
- 75.0 LB
- Flange Mount
- Left Hand (CCW)
- 42 gal/min @ 1200 rpm
- 45VQ42A-1A20-LH
- 3
- Flange
- 5/16 in
-
Piston Pump INC2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
TIMKEN E-PF-TRB-3 Flange Block Bearings Specifications
- 20
- 42 gpm @ 1200 rpm
- 1
- 1.25 in
- Straight w/ Key
- 63 gpm @ 1800 rpm
- 45VQ
- 2.44 in
- None
- 1 1/2 in Flange
- Buna-N
- 2200
- 2500 psi
- 63
- A
- SAE C, 2 Bolt
- Single Shaft Seal
- Opposite Inlet Port
- 45VQ42A-1A20-LH
- 8.5
- w/o Integral Valves
TIMKEN E-PF-TRB-3 TIMKEN E-PF-TRB-3 Flange Block Bearings Dimensions
TIMKEN E-PF-TRB-3 Flange Block Bearings Series Supply | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | D | e | d | Noun | Note | Seals | Weight | UNSPSC |
E-PF-TRB-3 | TIMKEN | 4.5 Inch | 114.3 Millimeter | 0.46 | 3 Inch | 76.2 Millimeter | Bearing | Note: All units have a 1/8 pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occur | Double Lip Radial | 25 lb | 31171501 |
E-PF-TRB-3 1/2 | TIMKEN | 5 Inch | 127 Millimeter | 0.50 | 3.5 Inch | 88.9 Millimeter | Bearing | Note: All units have a 1/8 pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occur | Double Lip Radial | 42 lb | 31171501 |
E-PF-TRB-3 1/4 | TIMKEN | 5 Inch | 127 Millimeter | 0.50 | 3.25 Inch | 82.55 Millimeter | Bearing | Note: All units have a 1/8 pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occur | Double Lip Radial | 44 lb | 31171501 |
E-PF-TRB-3 3/16 | TIMKEN | 5 Inch | 127 Millimeter | 0.50 | 3.188 Inch | 80.975 Millimeter | Bearing | Note: All units have a 1/8 pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occur | Double Lip Radial | 44 lb | 31171501 |
E-PF-TRB-3 15/16 | TIMKEN | 6.25 Inch | 158.75 Millimeter | 0.49 | 3.938 Inch | 100.025 Millimeter | Bearing | Note: All units have a 1/8 pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occur | Double Lip Radial | 59.0 lb | 31171501 |
E-PF-TRB-3 7/16 | TIMKEN | 5 Inch | 127 Millimeter | 0.50 | 3.438 Inch | 87.325 Millimeter | Bearing | Note: All units have a 1/8 pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occur | Double Lip Radial | 43 lb | 31171501 |
E-PF-TRB-35MM | TIMKEN | 3 Inch | 76.2 Millimeter | 0.46 | 1.378 Inch | 35 Millimeter | Bearing | Note: All units have a 1/8 pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occur | Double Lip Radial | 6.0 lb | 31171501 |
E-PF-TRB-35MM-ECC | TIMKEN | - | - | - | - | - | - | - | - |
E-PF-TRB-3 3/16-ECO | TIMKEN | - | 0.50 | - | - | Note: All units have a 1/8 pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occur | - | 44 lb | - |
E-PF-TRB-3 1/2-ECO | TIMKEN | - | 0.50 | - | - | Note: All units have a 1/8 pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occur | - | 42 lb | - |
E-PF-TRB-3 7/16-ECO | TIMKEN | - | 0.50 | - | - | Note: All units have a 1/8 pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occur | - | 43 lb | - |
3.543 Inch | 90 Millimeter x 5.512 Inch | 140 Millimeter x 1.89 Inch | 48 Millimeter TIMKEN 2MM9118WI DUH Precision Ball Bearings | Port Size:75.0 LB; Shaft Length:Flange Mount; Port Orientation - Cover End:Left Hand (CCW); Minor Diameter [Min:42 gal/min @ 1200 rpm; Mounting Flange:45VQ42A-1A20-LH; Displacement Cover End (cu in/revolution):3; Pilot Type:Flange; Minor Diameter [Max:5/16 in; Max. RPM [Max:20; Cover End Pressure [Max:42 gpm @ 1200 rpm; Shaft Code:1; Shaft Dia.:1.25 in; Shaft Type:Straight w/ Key; GPM @ Speed:63 gpm @ 1800 rpm; Pump Series:45VQ; Shaft Length:2.44 in; Mounting Code:None; Pressure Port:1 1/2 in Flange; Seal Material:Buna-N; Max. RPM [Max:2200; Pressure [Max:2500 psi; GPM @ 1,800 rpm:63; Inlet Port Code:A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Opposite Inlet Port; Manufacturer Part No.:45VQ42A-1A20-LH; Displacement (in³/rev):8.5; Integral Valve Configuration:w/o Integral Valves; |
TIMKEN NA24776SW-90087 Tapered Roller Bearing Assemblies | Major Diameter [Min:75.0 LB; Shaft Key:Flange Mount; Cover End Pressure [Max:Left Hand (CCW); Pump Series:42 gal/min @ 1200 rpm; Shaft End RPM [Max:45VQ42A-1A20-LH; Integral Valve Configuration:3; Mounting Flange:Flange; Minor Diameter [Min:5/16 in; Port Type:20; Rotation:42 gpm @ 1200 rpm; Shaft Code:1; Shaft Dia.:1.25 in; Shaft Type:Straight w/ Key; GPM @ Speed:63 gpm @ 1800 rpm; Pump Series:45VQ; Shaft Length:2.44 in; Mounting Code:None; Pressure Port:1 1/2 in Flange; Seal Material:Buna-N; Max. RPM [Max:2200; Pressure [Max:2500 psi; GPM @ 1,800 rpm:63; Inlet Port Code:A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Opposite Inlet Port; Manufacturer Part No.:45VQ42A-1A20-LH; Displacement (in³/rev):8.5; Integral Valve Configuration:w/o Integral Valves; |
0 Inch | 0 Millimeter x 1.57 Inch | 39.878 Millimeter x 0.42 Inch | 10.668 Millimeter TIMKEN LM11710-3 Tapered Roller Bearings | Shaft End Flow @ RPM:75.0 LB; Port Size:Flange Mount; Mounting Flange:Left Hand (CCW); Minor Diameter [Min:42 gal/min @ 1200 rpm; Shaft End RPM [Max:45VQ42A-1A20-LH; Cover End RPM [Max:3; Model No.:Flange; Max. RPM [Max:5/16 in; Pump Series:20; Port Orientation - Shaft End:42 gpm @ 1200 rpm; Shaft Code:1; Shaft Dia.:1.25 in; Shaft Type:Straight w/ Key; GPM @ Speed:63 gpm @ 1800 rpm; Pump Series:45VQ; Shaft Length:2.44 in; Mounting Code:None; Pressure Port:1 1/2 in Flange; Seal Material:Buna-N; Max. RPM [Max:2200; Pressure [Max:2500 psi; GPM @ 1,800 rpm:63; Inlet Port Code:A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Opposite Inlet Port; Manufacturer Part No.:45VQ42A-1A20-LH; Displacement (in³/rev):8.5; Integral Valve Configuration:w/o Integral Valves; |
3.188 Inch | 80.975 Millimeter x 0 Inch | 0 Millimeter x 1.421 Inch | 36.093 Millimeter TIMKEN 581-3 Tapered Roller Bearings | Shaft Length:75.0 LB; Major Diameter [Min:Flange Mount; Port Orientation - Cover End:Left Hand (CCW); Shaft Key:42 gal/min @ 1200 rpm; GPM @ 1,800 rpm, Shaft End:45VQ42A-1A20-LH; Shaft End Flow @ RPM:3; Cover End Pressure [Max:Flange; Weight:5/16 in; Port Type:20; Model No.:42 gpm @ 1200 rpm; Shaft Code:1; Shaft Dia.:1.25 in; Shaft Type:Straight w/ Key; GPM @ Speed:63 gpm @ 1800 rpm; Pump Series:45VQ; Shaft Length:2.44 in; Mounting Code:None; Pressure Port:1 1/2 in Flange; Seal Material:Buna-N; Max. RPM [Max:2200; Pressure [Max:2500 psi; GPM @ 1,800 rpm:63; Inlet Port Code:A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Opposite Inlet Port; Manufacturer Part No.:45VQ42A-1A20-LH; Displacement (in³/rev):8.5; Integral Valve Configuration:w/o Integral Valves; |
TIMKEN 42375-903B1 Tapered Roller Bearing Assemblies | Mounting Flange:75.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Manufacturer Part No.:Left Hand (CCW); Shaft Dia.:42 gal/min @ 1200 rpm; Minor Diameter:45VQ42A-1A20-LH; Shaft End Flow @ RPM:3; Pressure Port Size, Cover End:Flange; Pilot Type:5/16 in; Max. RPM [Max:20; Weight:42 gpm @ 1200 rpm; Shaft Code:1; Shaft Dia.:1.25 in; Shaft Type:Straight w/ Key; GPM @ Speed:63 gpm @ 1800 rpm; Pump Series:45VQ; Shaft Length:2.44 in; Mounting Code:None; Pressure Port:1 1/2 in Flange; Seal Material:Buna-N; Max. RPM [Max:2200; Pressure [Max:2500 psi; GPM @ 1,800 rpm:63; Inlet Port Code:A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Opposite Inlet Port; Manufacturer Part No.:45VQ42A-1A20-LH; Displacement (in³/rev):8.5; Integral Valve Configuration:w/o Integral Valves; |
12 Inch | 304.8 Millimeter x 0 Inch | 0 Millimeter x 2.87 Inch | 72.898 Millimeter TIMKEN LM757049NW-2 Tapered Roller Bearings | Cover End Flow @ RPM:75.0 LB; Shaft End Pressure [Max:Flange Mount; Port Size:Left Hand (CCW); Max. RPM [Max:42 gal/min @ 1200 rpm; Integral Valve Configuration:45VQ42A-1A20-LH; Minor Diameter [Max:3; Shaft Key:Flange; Shaft End Flow @ RPM:5/16 in; Cover End Pressure [Max:20; Pressure Port Size, Shaft End:42 gpm @ 1200 rpm; Shaft Code:1; Shaft Dia.:1.25 in; Shaft Type:Straight w/ Key; GPM @ Speed:63 gpm @ 1800 rpm; Pump Series:45VQ; Shaft Length:2.44 in; Mounting Code:None; Pressure Port:1 1/2 in Flange; Seal Material:Buna-N; Max. RPM [Max:2200; Pressure [Max:2500 psi; GPM @ 1,800 rpm:63; Inlet Port Code:A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Opposite Inlet Port; Manufacturer Part No.:45VQ42A-1A20-LH; Displacement (in³/rev):8.5; Integral Valve Configuration:w/o Integral Valves; |
TIMKEN HM133444-90424 Tapered Roller Bearing Assemblies | Cover End RPM [Max:75.0 LB; Pump Series:Flange Mount; Major Diameter [Min:Left Hand (CCW); GPM @ 1,800 rpm, Cover End:42 gal/min @ 1200 rpm; Displacement Cover End (cu in/revolution):45VQ42A-1A20-LH; Shaft Type:3; Port Orientation - Cover End:Flange; Rotation:5/16 in; Shaft Dia.:20; Controlled Flow Rate:42 gpm @ 1200 rpm; Shaft Code:1; Shaft Dia.:1.25 in; Shaft Type:Straight w/ Key; GPM @ Speed:63 gpm @ 1800 rpm; Pump Series:45VQ; Shaft Length:2.44 in; Mounting Code:None; Pressure Port:1 1/2 in Flange; Seal Material:Buna-N; Max. RPM [Max:2200; Pressure [Max:2500 psi; GPM @ 1,800 rpm:63; Inlet Port Code:A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Opposite Inlet Port; Manufacturer Part No.:45VQ42A-1A20-LH; Displacement (in³/rev):8.5; Integral Valve Configuration:w/o Integral Valves; |
TIMKEN YTU1 3/4 SGT Take Up Unit Bearings | Cover End Flow @ RPM:75.0 LB; Pump Series:Flange Mount; Pressure Port Size, Shaft End:Left Hand (CCW); Shaft Type:42 gal/min @ 1200 rpm; Cover End RPM [Max:45VQ42A-1A20-LH; GPM @ 1,800 rpm, Shaft End:3; Minor Diameter:Flange; Minor Diameter [Min:5/16 in; Seal Material:20; Shaft Seal Type:42 gpm @ 1200 rpm; Shaft Code:1; Shaft Dia.:1.25 in; Shaft Type:Straight w/ Key; GPM @ Speed:63 gpm @ 1800 rpm; Pump Series:45VQ; Shaft Length:2.44 in; Mounting Code:None; Pressure Port:1 1/2 in Flange; Seal Material:Buna-N; Max. RPM [Max:2200; Pressure [Max:2500 psi; GPM @ 1,800 rpm:63; Inlet Port Code:A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Opposite Inlet Port; Manufacturer Part No.:45VQ42A-1A20-LH; Displacement (in³/rev):8.5; Integral Valve Configuration:w/o Integral Valves; |
TIMKEN HM133444-90122 Tapered Roller Bearing Assemblies | Displacement Cover End (cu in/revolution):75.0 LB; Spline Description:Flange Mount; Mounting Flange:Left Hand (CCW); Shaft Type:42 gal/min @ 1200 rpm; Pressure Port Size, Shaft End:45VQ42A-1A20-LH; Shaft Dia.:3; Manufacturer Part No.:Flange; Shaft End Pressure [Max:5/16 in; Port Orientation - Shaft End:20; Integral Valve Configuration:42 gpm @ 1200 rpm; Shaft Code:1; Shaft Dia.:1.25 in; Shaft Type:Straight w/ Key; GPM @ Speed:63 gpm @ 1800 rpm; Pump Series:45VQ; Shaft Length:2.44 in; Mounting Code:None; Pressure Port:1 1/2 in Flange; Seal Material:Buna-N; Max. RPM [Max:2200; Pressure [Max:2500 psi; GPM @ 1,800 rpm:63; Inlet Port Code:A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Opposite Inlet Port; Manufacturer Part No.:45VQ42A-1A20-LH; Displacement (in³/rev):8.5; Integral Valve Configuration:w/o Integral Valves; |
2.953 Inch | 75 Millimeter x 0 Inch | 0 Millimeter x 2.008 Inch | 51 Millimeter TIMKEN JH415647-3 Tapered Roller Bearings | GPM @ 1,800 rpm, Shaft End:75.0 LB; Cover End Flow @ RPM:Flange Mount; Seal Material:Left Hand (CCW); Pump Series:42 gal/min @ 1200 rpm; Major Diameter [Max:45VQ42A-1A20-LH; Shaft End Pressure [Max:3; Spline Description:Flange; Shaft End RPM [Max:5/16 in; Minor Diameter [Min:20; Integral Valve Configuration:42 gpm @ 1200 rpm; Shaft Code:1; Shaft Dia.:1.25 in; Shaft Type:Straight w/ Key; GPM @ Speed:63 gpm @ 1800 rpm; Pump Series:45VQ; Shaft Length:2.44 in; Mounting Code:None; Pressure Port:1 1/2 in Flange; Seal Material:Buna-N; Max. RPM [Max:2200; Pressure [Max:2500 psi; GPM @ 1,800 rpm:63; Inlet Port Code:A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:Opposite Inlet Port; Manufacturer Part No.:45VQ42A-1A20-LH; Displacement (in³/rev):8.5; Integral Valve Configuration:w/o Integral Valves; |
The Timken Company | Engineered Bearings & Mechanical
The Timken Company designs a growing portfolio of engineered bearings and power transmission products. With more than a century of knowledge and
Bearing Search | The Timken Company
New Search Search for a bearing and then navigate to Tolerances, Periodic
Tapered Roller Bearings | The Timken Company
Inch Single Row. Single-row tapered roller bearings are the most basic and
Precision Bearings | The Timken Company
Our extensive range of Timken® precision bearing assemblies, designed for the
Timken Engineered Bearings | The Timken Company
Our tapered, spherical, cylindrical, thrust, ball, plain, miniature, precision and
TIMKEN E-PF-TRB-3 Flange Block Bearings Video
Contact Us

- Piston Pump INC
- AddressWorld Trade Center Panamá, Floor 16. Oficina 1601, Urbanización Marbella, Calle 53 Este, Apartado Po
- Phone(Working Time)264-3269
TIMKEN E-PF-TRB-3 Technical Articles
280x380x75 bearing size catalogue |
50x90x30.2 bearing cad model |
55x90x36 bearing price list |
Timken Bearing CATEGORIES
- Vickers PVXS series Piston Pump
- Vickers Piston Pump PV Series
- Vickers Piston pump PVH
- Vickers Piston Pump PVQ
- Vickers Piston Pump PVB
- Vickers Vane Pump
- SKF Bearing
- Timken Bearing
- AMI Bearing
- CONSOLIDATED BEARING
- DODGE Bearing
- LINK BELT Bearing
- QM INDUSTRIES Bearing
- SEALMASTER Bearing
- REXROTH Pressure reducing valve
- REXROTH HY-CHECK VALVE
- REXROTH Check valves
- REXROTH Pressure relief valve
- REXROTH Twin throttle check valve
- REXROTH Throttle check valves
- REXROTH Directional poppet valves
- REXROTH Throttle valves
- REXROTH Valves
- REXROTH Directional spool valves
- REXROTH Throttle check valve
- 32306 Bearing
- 32013x Bearing
- 32026 Bearing
- hk1010 needle Bearings
- Eaton Vickers ydraulic Pump
- For Komatsu
- For Rexroth
- Gear Pump
- Hydraulic Motor
- Kawasaki ydraulic Pump
- Original Hydraulic Pump
- Parker Denison ydraulic Pump
- Piston Pump
- Replacement for CAT
- Sauer ydraulic Pump
- Vane Pump
- Water Pump
- Yuken Hydraulic Pump
Customers Who Viewed TIMKEN E-PF-TRB-3 Also Viewed
TIMKEN YTU1 3/4 SGT Take Up Unit Bearings
TIMKEN HM133444-90424 Tapered Roller Bearing Assemblies
TIMKEN 42375-903B1 Tapered Roller Bearing Assemblies
3.188 Inch | 80.975 Millimeter x 0 Inch | 0 Millimeter x 1.421 Inch | 36.093 Millimeter TIMKEN 581-3 Tapered Roller Bearings
2.953 Inch | 75 Millimeter x 0 Inch | 0 Millimeter x 2.008 Inch | 51 Millimeter TIMKEN JH415647-3 Tapered Roller Bearings